Specifications:

• Base: 6 by 5 feet
• Center height: 38 inches
• Interior space: 30 square feet
• Sleeps: 2
• Windows: 1
• Door: Dutch D-style
• Floor: Welded polyethylene
• Frame: Fiberglass
• Carrying weight: 4.3 pounds

Amazon.com Tent Guide
Selecting a Tent
Fortunately, there are all kinds of tents for weekend car campers, Everest expeditions, and everything in-between. Here are a few things to keep in mind:

Expect the Worst
In general, it's wise to choose a tent that's designed to withstand the worst possible conditions you think you'll face. For instance, if you're a summer car camper in a region where weather is predictable, an inexpensive family or all-purpose tent will likely do the trick--especially if a vehicle is nearby and you can make a mad dash for safety when bad weather swoops in. If you're a backpacker, alpine climber, or bike explorer, or if you like to car camp in all seasons, you'll want to buy something designed to handle more adversity.

Three- and Four-Season Tents
For summer, early fall, and late spring outings, choose a three-season tent. At minimum, a quality three-season tent will have lightweight aluminum poles, a reinforced floor, durable stitching, and a quality rain fly. Some three-season tents offer more open-air netting and are specifically designed for summer backpacking or other activities. Many premium tents will also feature pre-sealed, taped seams and a silicone-impregnated rain fly for enhanced waterproofing.

For winter camping or alpine travel, go with a four-season model. Because they typically feature more durable fabric coatings, as well as more poles, four-season tents are designed to handle heavy snowfall and high winds without collapsing. Of course, four-season tents exact a weight penalty of about 10 to 20 percent in trade for their strength and durability. They also tend to be more expensive.

Domes and Tunnels
Tents are broadly categorized into two types: freestanding, which can stand up on their own, and tents that must be staked down in order to stand upright. Freestanding tents often incorporate a dome-shaped design, and most four-season tents are constructed this way because a dome leaves no flat spots on the outer surface where snow can collect. Domes are also inherently stronger than any other design. Meanwhile, many three-season models employ a modified dome configuration called a tunnel. These are still freestanding, but they require fewer poles than a dome, use less fabric, and typically have a rectangular floorplan that offers less storage space than a dome configuration. Many one and two-person tents are not freestanding, but they make up for it by being lighter. Because they use fewer poles, they can also be quicker to set up than a dome.

Size Matters
Ask yourself how many people you'd like to fit in your fabric hotel now and in the future. For soloists and minimalists, check out one-person tents. If you're a mega-minimalist, or if you have your eye on doing some big wall climbs, a waterproof-breathable bivy sack is the ticket. Some bivy sacks feature poles and stake points to give you a little more breathing room. Also, if you don't need bug protection and you want to save weight, check out open-air shelters.

Families who plan on car camping in good weather can choose from a wide range of jumbo-sized tents that will accommodate all your little ones with room to spare. A wide range of capacities is available for three- and four-season backpacking and expedition tents. Remember, though, the bigger the tent you buy, the heavier it will be, although it's easy to break up the tent components among several people in your group. It's also helpful to compare the volume and floor-space measurements of models you're considering.

The iBert Safe-T seat was developed after its creators became frustrated with the available bike seat options for children. They found that bike trailers kept their kids uncomfortably far away from them, got too hot in the sun, and only provided a limited view out to the children. The rear-mounted seats presented similar problems. The kids had a limited view and it was difficult to interact with them. Additionally, the balance of the bike was off and it was not easy to load and unload the kids. Other front mounted seats were complicated to hook onto the bike and difficult to remove. These seats also did not allow knee clearance for biking, and as a result were not comfortable.

The iBert Safe-T seat offers a variety of safety and comfort advantages compared to other child bike seat options. The iBert Safe-T seat allows you to maintain control of the bike when loading and unloading your child. To load and unload the child, you simply straddle the bike and lift the child into or out of the seat. When using the iBert seat you can always see what your child is doing and you can make sure that your child is safe and comfortable at all times. The center of gravity in the iBert seat is closer to the center of the bike making it easier to control the bike as you ride. The seat sits higher on the bike and is smooth on the bottom so that even tall riders rarely brush the bottom of the seat with their knees and if they do they just glide along the smooth edges on the bottom.

The iBert Safe-T seat is easy to install. The patented stinger assembly attaches to any bike with a minimum of 3/4 inches on the handle bar stem. The stinger system attaches to the bike in just two minutes and the seat can then be attached and detached from the stinger in 15 seconds. If you buy additional stinger assemblies the seat can be attached to multiple bikes.

The iBert Safe-T seat is made in the U.S.A. with safety and quality as the main objectives. While the iBert Safe-T seat is designed to meet all 1625-00 standards, at this time ASTM 1625-00 is written for rear child carriers not front mounted seats.

Specifications:

• Allows interaction with your child
• Child has a clear view
• No dirt, dust, rocks, or water thrown in child's face
• Small and easy to attach
• Easy and safe loading and unloading of child
• Maintains center of gravity
• Similar construction to rear-mounted seats
• One adult can take multiple children for bike rides
• Easy assembly
• Full clearance for knees
• Made in the USA
• Recommended for children one to four years old
• Maximum recommended height is 42 inches
• Maximum recommended weight is 38 pounds

What's in the Box?
iBert Safe-T Front Mounted Bike Seat, Stinger Assembly

Manufacturer's Warranty
Two year limited warranty for manufacturer's defects